Download Azpen A1045 USB Driver (official) for Windows
Download Azpen A1045 USB Driver for Windows Computer
Azpen A1045 USB Driver helps you to connect your Azpen A1045 to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Azpen A1045 Stock Firmware on your Azpen A1045 Device using the preloader drivers. Here on this page, we have managed to share the official Azpen A1045 USB Driver.
It is very necessary to have Azpen A1045 USB drivers whenever you have to connect Azpen A1045 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Azpen A1045 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Azpen A1045 USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
How to install Azpen A1045 USB drivers
The Azpen A1045 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Azpen A1045 from your PC in case you have installed it. Once you are done, click the below link to download Azpen A1045 USB Drivers on your PC.
Download Azpen A1045 ADB Driver 2022
USB Driver Name : Android ADB Driver
USB Filer Name :usb_driver_r13-windows.zip
USB Filer Size : 8.27 MB
How to install Azpen A1045 ADB Driver on Windows
Azpen A1045 ADB Driver can be used to connect the Azpen A1045 to the computer and transfer data between the mobile and the computer.
Step 1 : Download and extract Azpen A1045 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Azpen A1045 driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Azpen A1045 device to the computer.
Readme Please :
[#] Stock ROM: If you are looking for the Azpen A1045 Stock Firmware, then head over to the Azpen Firmware (Flash File) page.
Driver Signature Error: If you are facing Driver Signature Error while installing the Azpen A1045 USB Driver, then head over to How to Fix Driver Signature Error page.