Celkon C240

Celkon C240 USB Driver for Windows Computer

Celkon C240 USB Driver helps you to connect your Celkon Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Celkon C240 Stock Firmware on your Celkon Device using the preloader drivers. Here on this page, we have managed to share the official Celkon C240 USB Driver.

It is very necessary to have Celkon C240 USB drivers whenever you have to connect Celkon C240 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Celkon C240 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Celkon USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Celkon C240

Celkon C240 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 5 MB

Download Driver File Now

How to install Celkon C240 Spreadtrum Jungo Driver official on Windows

Celkon C240 Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Celkon C240 to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Celkon C240 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Celkon C240 driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Celkon C240 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Celkon C240 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

You can use the Spreadtrum SCI Driver to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Celkon C240 Spreadtrum SCI Driver official on Windows

The Celkon C240 SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Celkon C240 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Celkon C240 driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Celkon C240 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Celkon C240 Stock Firmware: If you are looking for the Celkon C240 Stock Firmware, then head over to the Stock Firmware page.

How4 to install Celkon C240 USB drivers

The Celkon C240 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Celkon C240 from your PC in case you have installed it. Once you are done, click the below link to download Celkon USB Drivers on your PC.

How to install Celkon C240 ADB Driver on Windows

Celkon ADB Driver can be used to connect the Celkon to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Celkon C240 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 2 :Installation Celkon C240 USB Driver

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 3 :Installation Celkon C240 USB Driver

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 4 :Installation Celkon C240 USB Driver

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 5 :Installation Celkon C240 USB Driver

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 6 :Installation Celkon C240 USB Driver

Step 7 : Click on the Next Button:

Step 7 :Installation Celkon C240 USB Driver

Step 8 : Then Click on the Have Disk Button:

Step 8 :Installation Celkon C240 USB Driver

Step 9 : Click on the Browse Button:

Step 9 :Installation Celkon C240 USB Driver

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 10 :Installation Celkon C240 USB Driver

Step 11 : Click on the OK Button:

Step 11 :Installation Celkon C240 USB Driver

Step 12 : Click on the Next button:

Step 12 :Installation Celkon C240 USB Driver

Step 13 : Again Click on the Next button:

Step 13 :Installation Celkon C240 USB Driver

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 14 :Installation Celkon C240 USB Driver

Step 15 : Your Celkon C240 driver is listed in the Device Manager.

Step 15 :Installation Celkon C240 USB Driver

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Celkon C240 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Celkon C240 Driver then See this Video to fix this problem.

[•] Request Celkon Driver: If you are looking for any specific Celkon drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).

 

Leave A Reply

Your email address will not be published.