Cross P9 Bintang

Cross P9 Bintang USB Driver for Windows Computer

Cross P9 Bintang USB Driver helps you to connect your Cross Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Cross P9 Bintang Stock Firmware on your Cross Device using the preloader drivers. Here on this page, we have managed to share the official Cross P9 Bintang USB Driver.

It is very necessary to have Cross P9 Bintang USB drivers whenever you have to connect Cross P9 Bintang to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Cross P9 Bintang manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Cross USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Cross P9 Bintang

Cross P9 Bintang Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 5 MB

Download Driver File Now

How to install Cross P9 Bintang Spreadtrum Jungo Driver official on Windows

Cross P9 Bintang Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Cross P9 Bintang to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Cross P9 Bintang driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Cross P9 Bintang driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Cross P9 Bintang Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Cross P9 Bintang Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

You can use the Spreadtrum SCI Driver to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Cross P9 Bintang Spreadtrum SCI Driver official on Windows

The Cross P9 Bintang SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Cross P9 Bintang driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Cross P9 Bintang driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Cross P9 Bintang Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Cross P9 Bintang Stock Firmware: If you are looking for the Cross P9 Bintang Stock Firmware, then head over to the Cross Firmware page.

How4 to install Cross P9 Bintang USB drivers

The Cross P9 Bintang USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Cross P9 Bintang from your PC in case you have installed it. Once you are done, click the below link to download Cross USB Drivers on your PC.

How to install Cross P9 Bintang ADB Driver on Windows

Cross ADB Driver can be used to connect the Cross to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Cross P9 Bintang ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 2 :Installation Cross P9 Bintang USB Driver

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 3 :Installation Cross P9 Bintang USB Driver

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 4 :Installation Cross P9 Bintang USB Driver

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 5 :Installation Cross P9 Bintang USB Driver

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 6 :Installation Cross P9 Bintang USB Driver

Step 7 : Click on the Next Button:

Step 7 :Installation Cross P9 Bintang USB Driver

Step 8 : Then Click on the Have Disk Button:

Step 8 :Installation Cross P9 Bintang USB Driver

Step 9 : Click on the Browse Button:

Step 9 :Installation Cross P9 Bintang USB Driver

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 10 :Installation Cross P9 Bintang USB Driver

Step 11 : Click on the OK Button:

Step 11 :Installation Cross P9 Bintang USB Driver

Step 12 : Click on the Next button:

Step 12 :Installation Cross P9 Bintang USB Driver

Step 13 : Again Click on the Next button:

Step 13 :Installation Cross P9 Bintang USB Driver

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 14 :Installation Cross P9 Bintang USB Driver

Step 15 : Your Cross P9 Bintang driver is listed in the Device Manager.

Step 15 :Installation Cross P9 Bintang USB Driver

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Cross P9 Bintang device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Cross P9 Bintang Driver then See this Video to fix this problem.

[•] Request Cross Driver: If you are looking for any specific Cross drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).

 

Leave A Reply

Your email address will not be published.