Download Dtac Joey Jump 3.5 V797 USB Driver (official) for Windows
Dtac Joey Jump 3.5 V797 USB Driver for Windows Computer
Dtac Joey Jump 3.5 V797 USB Driver helps you to connect your Dtac Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Dtac Joey Jump 3.5 V797 Stock Firmware on your Dtac Device using the preloader drivers. Here on this page, we have managed to share the official Dtac Joey Jump 3.5 V797 USB Driver.
It is very necessary to have Dtac Joey Jump 3.5 V797 USB drivers whenever you have to connect Dtac Joey Jump 3.5 V797 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Dtac Joey Jump 3.5 V797 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Dtac USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Dtac Joey Jump 3.5 V797 ADB Driver for Windows (11,10,8,7,XP)
Driver Package Name : ADB Driver for windows
Package File Name: usb_driver_r13-windows_(USB-Driver.NET).zip
Driver File Size: 8.27 MB
How to Install: Follow Guidelines
[•] Download Dtac Joey Jump 3.5 V797 Stock Firmware: If you are looking for the Stock Firmware, then head over to the Stock Firmware page.
How4 to install Dtac Joey Jump 3.5 V797 USB drivers
The Dtac Joey Jump 3.5 V797 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Dtac Joey Jump 3.5 V797 from your PC in case you have installed it. Once you are done, click the below link to download Dtac USB Drivers on your PC.
How to install Dtac Joey Jump 3.5 V797 ADB Driver on Windows
Dtac ADB Driver can be used to connect the Dtac to the computer and transfer data between the mobile and the computer.
Step 1 : Download and extract Dtac Joey Jump 3.5 V797 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Dtac Joey Jump 3.5 V797 driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Dtac Joey Jump 3.5 V797 device to the computer.
[•] Driver Signature Error: If you got Driver Signature Error While installing the Dtac Joey Jump 3.5 V797 Driver then See this Video to fix this problem.
[•] Request Dtac Driver: If you are looking for any specific Dtac drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).