Ergo F182 Point
Ergo F182 Point USB Driver for Windows Computer
Ergo F182 Point USB Driver helps you to connect your Ergo Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Ergo F182 Point Stock Firmware on your Ergo Device using the preloader drivers. Here on this page, we have managed to share the official Ergo F182 Point USB Driver.
It is very necessary to have Ergo F182 Point USB drivers whenever you have to connect Ergo F182 Point to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Ergo F182 Point manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Ergo USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Ergo F182 Point Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)
Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 4.74 MB
How to install Ergo F182 Point Spreadtrum Jungo Driver official on Windows
Ergo F182 Point Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Ergo F182 Point to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.
Step 1 : Download and extract the Ergo F182 Point driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.
Step 2 : Once the Ergo F182 Point driver package is extracted on the computer, you will be able to see the following files:
Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).
Step 4 : Open DPInst.exe to Launch the Setup:
Step 5 : Click on the Next Button:
Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.
Step 7 : Restart the Computer.
Step 8 : Once the Computer is restarted, you can easily connect your Ergo F182 Point Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.
Ergo F182 Point Spreadtrum SCI Driver for Windows (11,10,8,7,XP)
Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB
How to install Ergo F182 Point Spreadtrum SCI Driver official on Windows
The Ergo F182 Point SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.
Step 1 : Download and extract the Ergo F182 Point driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Ergo F182 Point driver package is extracted on the computer, you will be able to see the following files: 
Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). 
Step 4 : Open DPInst.exe to Launch the Setup: 
Step 5 : Click on the Next Button: 
Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. 
Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Ergo F182 Point Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.
[•] Download Stock Firmware: If you are looking for the Ergo F182 Point Stock Firmware, then head over to the Ergo Firmware page.
How4 to install Ergo F182 Point USB drivers
The Ergo F182 Point USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Ergo F182 Point from your PC in case you have installed it. Once you are done, click the below link to download Ergo USB Drivers on your PC.
How to install Ergo F182 Point ADB Driver on Windows
Ergo ADB Driver can be used to connect the Ergo to the computer and transfer data between the mobile and the computer.
Step 1 : Download and extract Ergo F182 Point ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Ergo F182 Point driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Ergo F182 Point device to the computer.
[•] Driver Signature Error: If you got Driver Signature Error While installing the Ergo F182 Point Driver then See this Video to fix this problem.
[•] Request Ergo Driver: If you are looking for any specific Ergo drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).