Download Jiayu G1 USB Driver (official) for Windows
Jiayu G1 USB Driver for Windows Computer
Jiayu G1 USB Driver helps you to connect your Jiayu Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Jiayu G1 Stock Firmware on your Jiayu Device using the preloader drivers. Here on this page, we have managed to share the official Jiayu G1 USB Driver.
It is very necessary to have Jiayu G1 USB drivers whenever you have to connect Jiayu G1 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Jiayu G1 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Jiayu USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Jiayu G1 MediaTek Driver for Windows (11,10,8,7,XP)
Driver Package Name : MediaTek Driver for windows
Package File Name: Mediatek_Driver_Auto_Installer_v1.1352_(USB-Driver.NET).zip
Driver File Size: 9.56 MB
How to install Jiayu G1 Mediatek Driver official on Windows
Jiayu G1 Mediatek Driver is compatible with the SP Flash Tool, MTK Flash Tool, SP MDT Tool, and the SN Write Tool and can be useful if you are trying to install firmware (ROM) on the Jiayu G1.
Step 1 : Download and extract Jiayu G1 Mediatek Driver Auto Installer package on the Computer. If in case, you have already downloaded and extracted the driver package, then SKIP this step.
Step 2 : Once you have extracted the driver package, you will be able to see the following files:
Step 3 : Open Install Drivers.bat to Launch the Setup Dialog Box:
Step 4 : Once the Driver Setup Dialog Box is Launched, you will be able to see the following window:
Step 5 : Now, Press any Key (from keyboard) to begin the installation process.
Step 6 : Once the installation process is completed, you will be able to see the Driver installation Completed Message:
Step 7 : Now, Press any Key (from keyboard) to exit the Setup Window.
Step 8 : Restart your Computer:
Step 9 : Once the Computer is restarted, you can easily connect your Jiayu G1 MediaTek the computer without facing any issue.
Jiayu G1 ADB Driver for Windows (11,10,8,7,XP)
Driver Package Name : ADB Driver for windows
Package File Name: usb_driver_r13-windows_(USB-Driver.NET).zip
Driver File Size: 8.27 MB
How to Install: Follow Guidelines
[•] Download Stock Firmware: If you are looking for the Jiayu G1 Stock Firmware, then head over to the Jiayu Firmware page.
How4 to install Jiayu G1 USB drivers
The Jiayu G1 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Jiayu G1 from your PC in case you have installed it. Once you are done, click the below link to download Jiayu USB Drivers on your PC.
How to install Jiayu G1 ADB Driver on Windows
Step 1 : Download and extract Jiayu G1 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Jiayu G1 driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Jiayu G1 device to the computer.
[•] Driver Signature Error: If you got Driver Signature Error While installing the Jiayu G1 Driver then See this Video to fix this problem.
[•] Request Jiayu Driver: If you are looking for any specific Jiayu drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).