Kingstar Hero 7

Kingstar Hero 7 USB Driver for Windows Computer

Kingstar Hero 7 USB Driver helps you to connect your Kingstar Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Kingstar Hero 7 Stock Firmware on your Kingstar Device using the preloader drivers. Here on this page, we have managed to share the official Kingstar Hero 7 USB Driver.

It is very necessary to have Kingstar Hero 7 USB drivers whenever you have to connect Kingstar Hero 7 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Kingstar Hero 7 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Kingstar USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Kingstar Hero 7

Kingstar Hero 7 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 5 MB

Download Driver File Now

How to install Kingstar Hero 7 Spreadtrum Jungo Driver official on Windows

Kingstar Hero 7 Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Kingstar Hero 7 to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Kingstar Hero 7 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Kingstar Hero 7 driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Kingstar Hero 7 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Kingstar Hero 7 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

You can use the Spreadtrum SCI Driver to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Kingstar Hero 7 Spreadtrum SCI Driver official on Windows

The Kingstar Hero 7 SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Kingstar Hero 7 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Kingstar Hero 7 driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Kingstar Hero 7 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Kingstar Hero 7 Stock Firmware: If you are looking for the Kingstar Hero 7 Stock Firmware, then head over to the Stock Firmware page.

How4 to install Kingstar Hero 7 USB drivers

The Kingstar Hero 7 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Kingstar Hero 7 from your PC in case you have installed it. Once you are done, click the below link to download Kingstar USB Drivers on your PC.

How to install Kingstar Hero 7 ADB Driver on Windows

Kingstar ADB Driver can be used to connect the Kingstar to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Kingstar Hero 7 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 2 :Installation Kingstar Hero 7 USB Driver

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 3 :Installation Kingstar Hero 7 USB Driver

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 4 :Installation Kingstar Hero 7 USB Driver

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 5 :Installation Kingstar Hero 7 USB Driver

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 6 :Installation Kingstar Hero 7 USB Driver

Step 7 : Click on the Next Button:

Step 7 :Installation Kingstar Hero 7 USB Driver

Step 8 : Then Click on the Have Disk Button:

Step 8 :Installation Kingstar Hero 7 USB Driver

Step 9 : Click on the Browse Button:

Step 9 :Installation Kingstar Hero 7 USB Driver

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 10 :Installation Kingstar Hero 7 USB Driver

Step 11 : Click on the OK Button:

Step 11 :Installation Kingstar Hero 7 USB Driver

Step 12 : Click on the Next button:

Step 12 :Installation Kingstar Hero 7 USB Driver

Step 13 : Again Click on the Next button:

Step 13 :Installation Kingstar Hero 7 USB Driver

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 14 :Installation Kingstar Hero 7 USB Driver

Step 15 : Your Kingstar Hero 7 driver is listed in the Device Manager.

Step 15 :Installation Kingstar Hero 7 USB Driver

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Kingstar Hero 7 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Kingstar Hero 7 Driver then See this Video to fix this problem.

[•] Request Kingstar Driver: If you are looking for any specific Kingstar drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).

 

Leave A Reply

Your email address will not be published.