Mafe M115

Mafe M115 USB Driver for Windows Computer

Mafe M115 USB Driver helps you to connect your Mafe Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Mafe M115 Stock Firmware on your Mafe Device using the preloader drivers. Here on this page, we have managed to share the official Mafe M115 USB Driver.

It is very necessary to have Mafe M115 USB drivers whenever you have to connect Mafe M115 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Mafe M115 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Mafe USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Mafe M115 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 5 MB

Download Driver File Now

How to install Mafe M115 Spreadtrum Jungo Driver official on Windows

Mafe M115 Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Mafe M115 to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Mafe M115 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Mafe M115 driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Mafe M115 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Mafe M115 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

You can use the Spreadtrum SCI Driver to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Mafe M115 Spreadtrum SCI Driver official on Windows

The Mafe M115 SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Mafe M115 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Mafe M115 driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Mafe M115 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

How4 to install Mafe M115 USB drivers

The Mafe M115 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Mafe M115 from your PC in case you have installed it. Once you are done, click the below link to download Mafe USB Drivers on your PC.

How to install Mafe M115 ADB Driver on Windows

Mafe ADB Driver can be used to connect the Mafe to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Mafe M115 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 7 : Click on the Next Button:

Step 8 : Then Click on the Have Disk Button:

Step 9 : Click on the Browse Button:

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 11 : Click on the OK Button:

Step 12 : Click on the Next button:

Step 13 : Again Click on the Next button:

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 15 : Your Mafe M115 driver is listed in the Device Manager.

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Mafe M115 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Mafe M115 Driver then See this Video to fix this problem.

[•] Request Mafe Driver: If you are looking for any specific Mafe drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).