Download Micronex MX-35 USB Driver (official) for Windows

Micronex MX-35 USB Driver for Windows Computer

Micronex MX-35 USB Driver helps you to connect your Micronex Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Micronex MX-35 Stock Firmware on your Micronex Device using the preloader drivers. Here on this page, we have managed to share the official Micronex MX-35 USB Driver.

It is very necessary to have Micronex MX-35 USB drivers whenever you have to connect Micronex MX-35 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Micronex MX-35 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Micronex USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Micronex MX-35

Micronex MX-35 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 4.74 MB

Download Driver File Now

How to install Micronex MX-35 Spreadtrum Jungo Driver official on Windows

Micronex MX-35 Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Micronex MX-35 to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Micronex MX-35 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Micronex MX-35 driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Micronex MX-35 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Micronex MX-35 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Micronex MX-35 Spreadtrum SCI Driver official on Windows

The Micronex MX-35 SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Micronex MX-35 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Micronex MX-35 driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Micronex MX-35 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Stock Firmware: If you are looking for the Micronex MX-35 Stock Firmware, then head over to the Micronex Firmware page.

How4 to install Micronex MX-35 USB drivers

The Micronex MX-35 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Micronex MX-35 from your PC in case you have installed it. Once you are done, click the below link to download Micronex USB Drivers on your PC.

How to install Micronex MX-35 ADB Driver on Windows

Micronex ADB Driver can be used to connect the Micronex to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Micronex MX-35 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 2 :Installation Micronex MX-35 USB Driver

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 3 :Installation Micronex MX-35 USB Driver

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 4 :Installation Micronex MX-35 USB Driver

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 5 :Installation Micronex MX-35 USB Driver

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 6 :Installation Micronex MX-35 USB Driver

Step 7 : Click on the Next Button:

Step 7 :Installation Micronex MX-35 USB Driver

Step 8 : Then Click on the Have Disk Button:

Step 8 :Installation Micronex MX-35 USB Driver

Step 9 : Click on the Browse Button:

Step 9 :Installation Micronex MX-35 USB Driver

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 10 :Installation Micronex MX-35 USB Driver

Step 11 : Click on the OK Button:

Step 11 :Installation Micronex MX-35 USB Driver

Step 12 : Click on the Next button:

Step 12 :Installation Micronex MX-35 USB Driver

Step 13 : Again Click on the Next button:

Step 13 :Installation Micronex MX-35 USB Driver

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 14 :Installation Micronex MX-35 USB Driver

Step 15 : Your Micronex MX-35 driver is listed in the Device Manager.

Step 15 :Installation Micronex MX-35 USB Driver

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Micronex MX-35 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Micronex MX-35 Driver then See this Video to fix this problem.

[•] Request Micronex Driver: If you are looking for any specific Micronex drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).

 

Leave A Reply

Your email address will not be published.