Download Multilaser M10A USB Driver (official) for Windows
Download Multilaser M10A USB Driver for Windows Computer
Multilaser M10A USB Driver helps you to connect your Multilaser M10A to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Multilaser M10A Stock Firmware on your Multilaser M10A Device using the preloader drivers. Here on this page, we have managed to share the official Multilaser M10A USB Driver.
It is very necessary to have Multilaser M10A USB drivers whenever you have to connect Multilaser M10A to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Multilaser M10A manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Multilaser M10A USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
How to install Multilaser M10A USB drivers
The Multilaser M10A USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Multilaser M10A from your PC in case you have installed it. Once you are done, click the below link to download Multilaser M10A USB Drivers on your PC.
Download Multilaser M10A Mediatek Driver 2022
USB Driver Name : Mediatek Driver
USB Filer Name :Mediatek_Driver_Auto_Installer_v1.1352.zip
USB Filer Size : 10 MB
How to install Multilaser M10A Mediatek Driver official on Windows
Multilaser M10A Mediatek Driver is compatible with the SP Flash Tool, MTK Flash Tool, SP MDT Tool, and the SN Write Tool and can be useful if you are trying to install firmware (ROM) on the Multilaser M10A.
Step 1 : Download and extract Multilaser M10A Mediatek Driver Auto Installer package on the Computer. If in case, you have already downloaded and extracted the driver package, then SKIP this step.
Step 2 :Once you have extracted the driver package, you will be able to see the following files:
Step 3 : Open Install Drivers.bat to Launch the Setup Dialog Box:
Step 4 :Once the Driver Setup Dialog Box is Launched, you will be able to see the following window:
Step 5 :Now, Press any Key (from keyboard) to begin the installation process.
Step 6 : Once the installation process is completed, you will be able to see the Driver installation Completed Message:
Step 7 : Now, Press any Key (from keyboard) to exit the Setup Window.
Step 8 : Restart your Computer:
Step 9 : Once the Computer is restarted, you can easily connect your Multilaser M10A MediaTek the computer without facing any issue.
Download Multilaser M10A ADB Driver 2022
USB Driver Name : Android ADB Driver
USB Filer Name :usb_driver_r13-windows.zip
USB Filer Size : 8.27 MB
How to install Multilaser M10A ADB Driver on Windows
Multilaser M10A ADB Driver can be used to connect the Multilaser M10A to the computer and transfer data between the mobile and the computer.
Step 1 : Download and extract Multilaser M10A ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Multilaser M10A driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Multilaser M10A device to the computer.
Readme Please :
[#] Stock ROM: If you are looking for the Multilaser M10A Stock Firmware, then head over to the Multilaser Firmware (Flash File) page.
Driver Signature Error: If you are facing Driver Signature Error while installing the Multilaser M10A USB Driver, then head over to How to Fix Driver Signature Error page.