Multilaser M7S Lite USB Drivers helps you to connect your Multilaser M7S Lite to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Multilaser M7S Lite Stock Firmware on your Multilaser M7S Lite Device using the preloader drivers. Here on this page, we have managed to share the official Multilaser M7S Lite USB Driver.
It is very necessary to have Multilaser M7S Lite USB drivers whenever you have to connect Multilaser M7S Lite to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Multilaser M7S Lite manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Multilaser M7S Lite USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Install Multilaser M7S Lite USB drivers
The Multilaser M7S Lite USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Multilaser M7S Lite from your PC in case you have installed it. Once you are done, click the below link to download Multilaser M7S Lite USB Drivers on your PC.
There is 1 USB driver available for the device i.e ADB Driver. The ADB Driver can be useful to establish a connection between the mobile and the computer.
Download Multilaser M7S Lite ADB Driver
Multilaser M7S Lite ADB Driver can be used to connect the Multilaser M7S Lite to the computer and transfer data between the mobile and the computer.Step 1 : Download and extract Multilaser M7S Lite ADB Driver (.inf based) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Multilaser M7S Lite driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Multilaser M7S Lite device to the computer.
Name of Driver: Android ADB Driver
File Name: usb_driver_r13-windows-(USB-Driver.NET).zip
Download Driver Size: 8.27 MB
Readme Once:
Multilaser M7S Lite Stock Firmware: If you are looking for the Multilaser M7S Lite Stock Firmware, then head over to the Multilaser Firmware page.
Driver Signature Error: If you are facing Driver Signature Error while installing the Multilaser M7S Lite USB Driver, then head over to How to Fix Driver Signature Error page.