Vell-com V1200

Vell-com V1200 USB Driver for Windows Computer

Vell-com V1200 USB Driver helps you to connect your Vell-com Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Vell-com V1200 Stock Firmware on your Vell-com Device using the preloader drivers. Here on this page, we have managed to share the official Vell-com V1200 USB Driver.

It is very necessary to have Vell-com V1200 USB drivers whenever you have to connect Vell-com V1200 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Vell-com V1200 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Vell-com USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Vell-com V1200

Vell-com V1200 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 4.74 MB

Download Driver File Now

How to install Vell-com V1200 Spreadtrum Jungo Driver official on Windows

Vell-com V1200 Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Vell-com V1200 to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Vell-com V1200 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Vell-com V1200 driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Vell-com V1200 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Vell-com V1200 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Vell-com V1200 Spreadtrum SCI Driver official on Windows

The Vell-com V1200 SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Vell-com V1200 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Vell-com V1200 driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Vell-com V1200 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Stock Firmware: If you are looking for the Vell-com V1200 Stock Firmware, then head over to the Vell-com Firmware page.

How4 to install Vell-com V1200 USB drivers

The Vell-com V1200 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Vell-com V1200 from your PC in case you have installed it. Once you are done, click the below link to download Vell-com USB Drivers on your PC.

How to install Vell-com V1200 ADB Driver on Windows

Vell-com ADB Driver can be used to connect the Vell-com to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Vell-com V1200 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 2 :Installation Vell-com V1200 USB Driver

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 3 :Installation Vell-com V1200 USB Driver

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 4 :Installation Vell-com V1200 USB Driver

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 5 :Installation Vell-com V1200 USB Driver

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 6 :Installation Vell-com V1200 USB Driver

Step 7 : Click on the Next Button:

Step 7 :Installation Vell-com V1200 USB Driver

Step 8 : Then Click on the Have Disk Button:

Step 8 :Installation Vell-com V1200 USB Driver

Step 9 : Click on the Browse Button:

Step 9 :Installation Vell-com V1200 USB Driver

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 10 :Installation Vell-com V1200 USB Driver

Step 11 : Click on the OK Button:

Step 11 :Installation Vell-com V1200 USB Driver

Step 12 : Click on the Next button:

Step 12 :Installation Vell-com V1200 USB Driver

Step 13 : Again Click on the Next button:

Step 13 :Installation Vell-com V1200 USB Driver

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 14 :Installation Vell-com V1200 USB Driver

Step 15 : Your Vell-com V1200 driver is listed in the Device Manager.

Step 15 :Installation Vell-com V1200 USB Driver

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Vell-com V1200 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Vell-com V1200 Driver then See this Video to fix this problem.

[•] Request Vell-com Driver: If you are looking for any specific Vell-com drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).

 

Leave A Reply

Your email address will not be published.