Wham W27 Duo
Wham W27 Duo USB Driver for Windows Computer
Wham W27 Duo USB Driver helps you to connect your Wham Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Wham W27 Duo Stock Firmware on your Wham Device using the preloader drivers. Here on this page, we have managed to share the official Wham W27 Duo USB Driver.
It is very necessary to have Wham W27 Duo USB drivers whenever you have to connect Wham W27 Duo to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Wham W27 Duo manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Wham USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Wham W27 Duo Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)
Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 4.74 MB
How to install Wham W27 Duo Spreadtrum Jungo Driver official on Windows
Wham W27 Duo Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Wham W27 Duo to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.
Step 1 : Download and extract the Wham W27 Duo driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.
Step 2 : Once the Wham W27 Duo driver package is extracted on the computer, you will be able to see the following files:
Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).
Step 4 : Open DPInst.exe to Launch the Setup:
Step 5 : Click on the Next Button:
Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.
Step 7 : Restart the Computer.
Step 8 : Once the Computer is restarted, you can easily connect your Wham W27 Duo Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.
Wham W27 Duo Spreadtrum SCI Driver for Windows (11,10,8,7,XP)
Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB
How to install Wham W27 Duo Spreadtrum SCI Driver official on Windows
The Wham W27 Duo SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.
Step 1 : Download and extract the Wham W27 Duo driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Wham W27 Duo driver package is extracted on the computer, you will be able to see the following files: 
Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). 
Step 4 : Open DPInst.exe to Launch the Setup: 
Step 5 : Click on the Next Button: 
Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. 
Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Wham W27 Duo Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.
[•] Download Wham W27 Duo Stock Firmware: If you are looking for the Stock Firmware, then head over to the Stock Firmware page.
How4 to install Wham W27 Duo USB drivers
The Wham W27 Duo USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Wham W27 Duo from your PC in case you have installed it. Once you are done, click the below link to download Wham USB Drivers on your PC.
How to install Wham W27 Duo ADB Driver on Windows
Wham ADB Driver can be used to connect the Wham to the computer and transfer data between the mobile and the computer.
Step 1 : Download and extract Wham W27 Duo ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Wham W27 Duo driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Wham W27 Duo device to the computer.
[•] Driver Signature Error: If you got Driver Signature Error While installing the Wham W27 Duo Driver then See this Video to fix this problem.
[•] Request Wham Driver: If you are looking for any specific Wham drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).