Zelta F18

Zelta F18 USB Driver for Windows Computer

Zelta F18 USB Driver helps you to connect your Zelta Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Zelta F18 Stock Firmware on your Zelta Device using the preloader drivers. Here on this page, we have managed to share the official Zelta F18 USB Driver.

It is very necessary to have Zelta F18 USB drivers whenever you have to connect Zelta F18 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Zelta F18 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Zelta USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Zelta F18

Zelta F18 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 5 MB

Download Driver File Now

How to install Zelta F18 Spreadtrum Jungo Driver official on Windows

Zelta F18 Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Zelta F18 to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Zelta F18 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.

Step 2 : Once the Zelta F18 driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Zelta F18 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Zelta F18 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

You can use the Spreadtrum SCI Driver to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Zelta F18 Spreadtrum SCI Driver official on Windows

The Zelta F18 SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Zelta F18 driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Zelta F18 driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Zelta F18 Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Zelta F18 Stock Firmware: If you are looking for the Zelta F18 Stock Firmware, then head over to the Stock Firmware page.

How4 to install Zelta F18 USB drivers

The Zelta F18 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Zelta F18 from your PC in case you have installed it. Once you are done, click the below link to download Zelta USB Drivers on your PC.

How to install Zelta F18 ADB Driver on Windows

Zelta ADB Driver can be used to connect the Zelta to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Zelta F18 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 2 :Installation Zelta F18 USB Driver

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 3 :Installation Zelta F18 USB Driver

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 4 :Installation Zelta F18 USB Driver

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 5 :Installation Zelta F18 USB Driver

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 6 :Installation Zelta F18 USB Driver

Step 7 : Click on the Next Button:

Step 7 :Installation Zelta F18 USB Driver

Step 8 : Then Click on the Have Disk Button:

Step 8 :Installation Zelta F18 USB Driver

Step 9 : Click on the Browse Button:

Step 9 :Installation Zelta F18 USB Driver

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 10 :Installation Zelta F18 USB Driver

Step 11 : Click on the OK Button:

Step 11 :Installation Zelta F18 USB Driver

Step 12 : Click on the Next button:

Step 12 :Installation Zelta F18 USB Driver

Step 13 : Again Click on the Next button:

Step 13 :Installation Zelta F18 USB Driver

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 14 :Installation Zelta F18 USB Driver

Step 15 : Your Zelta F18 driver is listed in the Device Manager.

Step 15 :Installation Zelta F18 USB Driver

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Zelta F18 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Zelta F18 Driver then See this Video to fix this problem.

[•] Request Zelta Driver: If you are looking for any specific Zelta drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).

 

Leave A Reply

Your email address will not be published.