Bush 10NOU

Bush 10NOU USB Driver for Windows Computer

Bush 10NOU USB Driver helps you to connect your Bush Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Bush 10NOU Stock Firmware on your Bush Device using the preloader drivers. Here on this page, we have managed to share the official Bush 10NOU USB Driver.

It is very necessary to have Bush 10NOU USB drivers whenever you have to connect Bush 10NOU to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Bush 10NOU manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Bush USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Bush 10NOU ADB Driver for Windows (11,10,8,7,XP)

Driver Package Name : Android ADB Driver for windows
Package File Name: usb_driver_r13-windows_(USB-Driver.NET).zip
Driver File Size: 8.27 MB

Download Driver File Now

How4 to install Bush 10NOU USB drivers

The Bush 10NOU USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Bush 10NOU from your PC in case you have installed it. Once you are done, click the below link to download Bush USB Drivers on your PC.

How to install Bush 10NOU ADB Driver on Windows

Bush ADB Driver can be used to connect the Bush to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Bush 10NOU ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 7 : Click on the Next Button:

Step 8 : Then Click on the Have Disk Button:

Step 9 : Click on the Browse Button:

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 11 : Click on the OK Button:

Step 12 : Click on the Next button:

Step 13 : Again Click on the Next button:

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 15 : Your Bush 10NOU driver is listed in the Device Manager.

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Bush 10NOU device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Bush 10NOU Driver then See this Video to fix this problem.

[•] Request Bush Driver: If you are looking for any specific Bush drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).