Icon i202 USB driver

Icon i202 USB driver for Windows Computer

Icon i202 USB driver helps you to connect your Icon Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Icon i202 USB driver Stock Firmware on your Icon Device using the preloader drivers. Here on this page, we have managed to share the official Icon i202 USB driver.

It is very necessary to have Icon i202 USB drivers whenever you have to connect Icon i202 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Icon i202 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Icon USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Icon i202 Spreadtrum Jungo Driver for Windows (11,10,8,7,XP)

Driver Package Name : Spreadtrum Jungo Driver for windows
Package File Name: Spreadtrum_Jungo_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 5 MB

Download Driver File Now

How to install Icon i202 USB driver Spreadtrum Jungo Driver official on Windows

Icon i202 USB driver Spreadtrum SCI Driver can be used to connect the Spreadtrum/Unisoc Icon i202 USB driver to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 2 : Once the Icon i202 USB driver driver package is extracted on the computer, you will be able to see the following files:

Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause).

Step 4 : Open DPInst.exe to Launch the Setup:

Step 5 : Click on the Next Button:

Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup.

Step 7 : Restart the Computer.

Step 8 : Once the Computer is restarted, you can easily connect your Icon i202 USB driver Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

Icon i202 Spreadtrum SCI Driver for Windows (11,10,8,7,XP)

You can use the Spreadtrum SCI Driver to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Driver Package Name : Spreadtrum SCI Driver for windows
Package File Name: Spreadtrum_SCI_USB2Serial_(USB-Driver.NET).zip
Driver File Size: 2.68 MB

Download Driver File Now

How to install Icon i202 USB driver Spreadtrum SCI Driver official on Windows

The Icon i202 USB driver SCI Driver can be used to connect the Spreadtrum/Unisoc device to the Computer. It also supports the SPD Flash Tool and WriteIMEI Tool.

Step 1 : Download and extract the Icon i202 USB driver driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step. Step 2 : Once the Icon i202 USB driver driver package is extracted on the computer, you will be able to see the following files: Step 3 : Now, Choose the x64 Folder if your System Type is x64 Bit or Choose x32 Folder if your System Type is x32 bit (you can check System Type by pressing Win + Pause). Step 4 : Open DPInst.exe to Launch the Setup: Step 5 : Click on the Next Button: Step 6 : Once the installation process is completed, Click on the Finish button to exit the Setup. Step 7 : Restart the Computer. Step 8 : Once the Computer is restarted, you can easily connect your Icon i202 USB driver Spreadtrum/Unisoc FeaturePhones to the computer without facing any issue.

[•] Download Stock Firmware: If you are looking for the Icon i202 Stock Firmware, then head over to the Icon Firmware page.

How4 to install Icon i202 USB drivers

The Icon i202 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Icon i202 from your PC in case you have installed it. Once you are done, click the below link to download Icon USB Drivers on your PC.

How to install Icon i202 ADB Driver on Windows

Icon ADB Driver can be used to connect the Icon to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Icon i202 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 7 : Click on the Next Button:

Step 8 : Then Click on the Have Disk Button:

Step 9 : Click on the Browse Button:

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 11 : Click on the OK Button:

Step 12 : Click on the Next button:

Step 13 : Again Click on the Next button:

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 15 : Your Icon i202 USB driver driver is listed in the Device Manager.

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Icon i202 USB driver device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Icon i202 USB driver Driver then See this Video to fix this problem.

[•] Request Icon Driver: If you are looking for any specific Icon drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).