Telco Galant S2

Telco Galant S2 USB Driver for Windows Computer

Telco Galant S2 USB Driver helps you to connect your Telco Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Telco Galant S2 Stock Firmware on your Telco Device using the preloader drivers. Here on this page, we have managed to share the official Telco Galant S2 USB Driver.

It is very necessary to have Telco Galant S2 USB drivers whenever you have to connect Telco Galant S2 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Telco Galant S2 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Telco USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Telco Galant S2 ADB Driver for Windows (11,10,8,7,XP)

Driver Package Name : Android ADB Driver for windows
Package File Name: usb_driver_r13-windows_(USB-Driver.NET).zip
Driver File Size: 8.27 MB

Download Driver File Now

How4 to install Telco Galant S2 USB drivers

The Telco Galant S2 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Telco Galant S2 from your PC in case you have installed it. Once you are done, click the below link to download Telco USB Drivers on your PC.

How to install Telco Galant S2 ADB Driver on Windows

Telco ADB Driver can be used to connect the Telco to the computer and transfer data between the mobile and the computer.

Step 1 : Download and extract Telco Galant S2 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.

Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:

Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):

Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:

Step 5 : Under Add hardware Dialog Box, Click on the Next Button:

Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:

Step 7 : Click on the Next Button:

Step 8 : Then Click on the Have Disk Button:

Step 9 : Click on the Browse Button:

Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).

Step 11 : Click on the OK Button:

Step 12 : Click on the Next button:

Step 13 : Again Click on the Next button:

Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).

Step 15 : Your Telco Galant S2 driver is listed in the Device Manager.

Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Telco Galant S2 device to the computer.

[•] Driver Signature Error: If you got Driver Signature Error While installing the Telco Galant S2 Driver then See this Video to fix this problem.

[•] Request Telco Driver: If you are looking for any specific Telco drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).